Bud Express Dispensary | mail: kumaj6906@gmail.com | call: +1 (805) 243-8230 | WhatsApp: +1 (805) 243-8230

HOW TO MAKE YOUR OWN THC E-LIQUID

Now that you know the benefits of making your own vape juice, let’s get into the nitty-gritty. It’s time to make your own! As with almost anything to do with cannabis, there’s more than one way to skin this cat. Below, we’ll talk you through three of the easiest methods.

ROSIN EXTRACTION

Using Rosin to make your own vape juice is the cleanest and quickest method. Rosin, by nature, is a low-risk extract. There are no solvents or harsh chemicals used in the process. It’s simply a matter of applying a bit of heat and pressure to extract the resin. You can use buds to make rosin if you have enough resinous flowers to hand. If not, you can press rosin from concentrates such as BHO Wax

EQUIPMENT

  • Dried cannabis flowers
  • Hair straightener(s)
  • Parchment paper
  • Small glass vial
  • Syringe
  • Natural flavouring or terpenes
  • Toothpick
  • Lighter

DIRECTIONS

STEP ONE

To begin, select a few plump and resinous buds from your stash and sandwich them in parchment paper. Turn on your hair straighteners and set them to a temperature of around 121°C. If your hair straighteners don’t have this low of a setting, heat them up and unplug them until they become slightly cooler.

STEP TWO

Place the wrapped buds between the hair straightener irons and apply significant pressure. Keep applying force as the resin oozes out of the flowers. Release the irons when the goo stops flowing. Unwrap the pressed buds to reveal a fresh patch of rosin. Repeat this process until you’ve made around 0.5g of rosin. You’ll need around 3g of high-quality herb to achieve this amount.

STEP THREE

Place the rosin-covered parchment paper into the fridge for around 20 minutes. Remove your cooled bounty and scrape off the rosin using a sturdy toothpick; place it in the glass vial. Add a few drops of your preferred terpenes or flavouring into the jar.

STEP FOUR

Next, you’ll need to mix your rosin and flavouring into an oil. To do this, you’ll need to flash heat the vial. Hold a flame underneath the container for around five seconds, or until the solution begins to bubble. Any less and the two substances won’t mix. Any more, and you’ll degrade the volatile terpenes. As soon as the mixture starts to bubble, remove the flame and give it a good mix using a toothpick. Then, draw the solution into a syringe and inject it into your vape pen cartridge.

Rosin Cannabis Oil

VEGETABLE GLYCERIN (SHORT-TERM)

This is another fast method for cannabis users looking for an instant supply of vape juice. It’s a relatively easy method that requires breaking up buds, mixing them with VG, and applying heat.

EQUIPMENT

  • Raw cannabis flowers
  • Food-grade VG
  • Vegetable oil
  • Small Pyrex dish
  • Large Pyrex dish
  • Glass jar x2
  • Stove
  • Thermometer x2
  • Sieve
  • Cheesecloth
  • Rubber spatula
  • Metal spoon

DIRECTIONS

STEP ONE

It’s time to get sticky. Tear apart your flowers with your bare hands and place the small pieces into a small Pyrex dish. Pour a small amount of VG into the dish and stir. Keep adding small amounts until the pieces are saturated, without the mixture becoming too thin.

STEP TWO

Pour the vegetable oil into the large Pyrex dish—enough to submerge the bottom inch of the small Pyrex dish. Place the oil on the stove or a hot plate and place the thermometer sensor inside. Heat the mixture up to a temperature of 104°C.

STEP THREE

Place the small Pyrex dish into the hot oil bath and insert the second thermometer into the mix of VG and broken-down buds. The aim is to heat the solution to around 82°C to allow the cannabinoids to diffuse into the VG. Maintain this temperature for 45 minutes and stir the mixture frequently.

STEP FOUR

Remove the small Pyrex dish from the oil bath and let it cool for several minutes. Next, place a sieve over a glass jar to strain the mixture. Use a spatula to press the bud against the sieve to extract as much liquid as possible. Repeat steps two and three a total of two times to extract as much THC as possible, using fresh VG each time.

STEP FIVE

Now that you’ve collected three runs in the glass jar, it’s time to purify your vape juice. Clean and dry your sieve; place it over a clean glass jar and add around four layers of cheesecloth. Pour your vape juice onto the cheesecloth and watch it filter through into the jar. Use the spatula to squeeze out any residue.

STEP SIX

Add your purified vape juice back into the small Pyrex dish. Heat up the oil bath and place the small Pyrex dish inside. Insert your thermometer and heat up the vape juice to exactly 104°C for 30 minutes. This will convert precursor cannabinoid THCA into psychoactive THC via decarboxylation.

STEP SEVEN

You’re all done! Use a dropper bottle or syringe to load up your vape pen cartridge with clean and potent vape juice!

VEGETABLE GLYCERIN (LONG-TERM)

Patient weed lovers are rare animals, indeed. If you happen to be one, this simple method is for you. It doesn’t use high temperatures. Instead, a long period of time allows the cannabinoids to diffuse into the mixture.

EQUIPMENT

  • Cannabis buds
  • Food-grade VG
  • Heat safe Pyrex bowl
  • Aluminium foil
  • Baking tray
  • Oven
  • Mason jar x2
  • Metal spoon
  • Sieve
  • Rubber spatula
  • Cheesecloth
  • Freezer

DIRECTIONS

STEP 1

Break up your flowers into small chunks using your hands or a pair of scissors. Avoid grinding them. If the pieces are too fine, they’ll make it through the filtration process.

STEP 2

Line a baking tray with aluminium foil and spread your plant material evenly over the surface. Preheat the oven to 121°C. Place your buds inside to decarboxylate for 30 minutes. Remove them and allow to cool.

STEP 3

Place your buds into a mason jar. Add a small amount of VG and stir. Keep adding VG until the mixture is clumpy and thick. Stop before the mixture becomes too liquidy and thin. Screw the lid on, label with the date, and store for one month (we told you it’d take a while).

STEP 4

After one month, remove the lid and stir the mixture well. Add a tablespoon of VG, stir again, and return to storage for another month. Repeat this process again one month later.

STEP 5

At the end of the third month, stir the mixture and strain through a sieve into another mason jar. Use the spatula to assist the process. Clean the sieve and original jar. Line the sieve with four layers of cheesecloth and strain the vape juice back into the original jar. Press out any residue with the spatula.

STEP 6

Use a syringe to add your vape juice into a cartridge—enjoy!

Royal Queen Seeds Cannabis E-liquids

YOU CAN ALSO TRY CBD E-LIQUIDS

Vaping e-liquids isn’t limited to getting stoned. Medicinal and recreational users can also vape them to enjoy the clear-headed and relaxing effects of CBD. CBD E-liquid is non-psychotropic, elevates the mood, and calms the nerves. It’s great before public speaking, meetings, social gatherings, or sleep. You can also purchase Pre-made CBD liquid if you don’t fancy making your own.

SAFETY IS PARAMOUNT

Making e-liquids at home is easy, but it isn’t without risk. Working with hot oil can be extremely dangerous, so handle with care. Also, you must ensure that all of the ingredients you use are food-grade and certified. There’s a lot of dodgy products out there, so do your research and shop with care. If you use common sense and take the right safety precautions, you’ll have your own stash of vape juice in no time.

Leave a Reply

Close Menu
×
×

Cart